High-performance Stationary Tilting tables is equipped with a hydraulic tilting device to tilt up the required Stationary Pallets for stripping the elements vertically as & when required. They are designed for the casting of reinforced large area concrete products of varying dimensions and configurations. High-frequency vibrators ensure excellent compacting of the freshly cast concrete. Consisting of a robust welded profile structure. Tilting tables are hydraulically operated and are horizontal at the time of casting. At the time of striping, tilting tables tilt to almost vertical or can be inclined by up to 72° to facilitate product removal in the correct position for transportation thus need lifting inserts only on the edges. They also reduce the steel required or can be stripped quickly. Depending on local climatic conditions or customers' specific requirements the tilting table can be equipped with a heating system & vibrating bed as well. Tilting tables can be set up individually or else coupled with one another to allow the use of machines corresponding to production on production lanes.

Tilting Tables is an extremely solid welded construction of steel structure profiles. With several main longitudinal beams and crossbeams for the telescopic cylinders. The diagonal crosses serve the purpose of tensional stiffness. The tilting frame is connected to the tilting trestle with tilting joints. The telescopic cylinder, the hydraulic piping and the pump unit are fixed components of the table. Tilting table size varies from 9 to 12 meter in length & 3.5 to 4.5 Meters in width.

1. By tilting it to 72° it is Easy and safe stripping of the elements.
2. Concrete elements can be load directly from the tilting table onto a truck.
3. Lifting or placing the elements requires only a few hook-up points with the crane.
4. Hydraulic tilting prevents the concrete edges from flaking and extensive repairs.
5. Tensional stiffness with generously dimensioned transverse cross prevents tears.
6. Tilting process is not distorted even if the tilting table is loaded unevenly.
7. Can be set up on well compacted even ground without foundations.
8. Can be coupled with high-frequency vibrators for Homogeneous compression.

Tilting table you can produce individual large wall panels with windows and door cut-outs as well as slim columns and beams, parapets, trusses, etc. Several tilting tables are placed in a long line allowing a railed concrete distributor to run over the tables spreading the concrete into the shuttered areas. When using several table lines an overhead concrete distributor over-spans all lines. Before spreading the concrete into the shuttered areas, all built-in units, electrical conduit and terminal boxes, piping, lifting hooks, anchors and connecting loops, etc. are precisely positioned with magnets or adhesive